Download Resetter Canon MP287

Download Resetter Canon MP287

Resetter Printers Canon MP287 Download
Printers Canon MP287 
Download Resetter Canon MP267– How to reset Canon MP287 printer following continuation of the previous article How to Reset Printer .
Canon MP287 printer malfunction indication :
– On a computer monitor appears warning ” Ink absorber is full ” , as shown below .
Ink absorber is full canon MP287 printer
– Printer Canon MP287 cartridges usually after house is turned on silent and do not move to the left or to the right.
– Bliking indicator light 
solution :
There are 2 steps to fix / reset the printer with symptoms as above.

Download Resetter Canon MP287

First Step
Login to the Service Mode .
Follow these steps:
1 . Make sure the printer is turned off , the power cord stuck in the printer .
2 . Press the STOP / RESET approximately 2 seconds ( not removable )
3 . Press the power button ( not removable )
So now both buttons ( resume and power ) are both still pressed .
4 . Remove the STOP / RESET ( still pressing the power button )
5 . Press the reset button 6 times
6 . Then release both buttons ( resume and power together )
Wait a moment , if successful, the printer LCD panel will be blank . But this has not been completed , follow the second step to the next stage reset canon MP287 printer .
Step Two
Resetting the printer using software resetter canon MP287
Follow these steps:
1 . Make sure the printer is connected to a computer with the right driver .
2 . Prepare software resetter canon MP258 , if you do not have a download click HERE
3 . Do not forget to enter two pieces of paper .
4 . Run the software , of course the software by clicking 2x . Sightings appear as shown below .
Resetter Printers Canon MP287 Download
Resetter Printers Canon MP287
5 . Clear ink counter on the menu – Absorber select Play then click SET to the right .
6 . On the menu Ink absorber counter – Absorber select Play then click SET to the right .
7 . Then click EEPROM . Wait for the printer to print one sheet .
8 . Turn the printer off , then on again , if successful MP287 printer is no error anymore .